News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Fe Special Sedan

Started by mad56, August 17, 2016, 09:43:01 AM

Previous topic - Next topic

mad56

Hows it going .
First time with an FE and first time posting.
I brought this Fe of a fella on the north side of Brizzy. He did not have any real history on this car.
I noticed that it has one of your club stickers on the car and was wandering if anyone knows the car and any history
for the car. It has had a lot of work done to it at some point.
Its running a red 202 with a 3sp on the floor and a hr diff 3.36







Cheers

DJ

It's easily recognised so you should find some interesting history on this forum.


From the ID plate.
FE-225-27132-S   FE Special Sedan, the 27,132nd manufactured in Sydney, NSW.

As for the rest of the numbers, I may be reading them incorrectly.
284-717   The Exterior Trim Code (284) describes this car as Unknown: The Interior Trim Code (717) refers to: Persian Turquoise & Parchment Ivory.
253-7472    The paint colour is Royal Marine (in DUCO Lacquer)
256-7698    The secondary colour is Castle Grey (in DUCO Lacquer)
Dave
0417 270 315

Dr_Terry

Hi Guys.

I believe that ID plate contains a mistake or a mis-stamping.

I think the 284 should read 248 which is GM-H code for Castle Grey over Royal Marine, which then agrees with the paint numbers.

Did this car have grey roof & a blue body or a blue roof & a grey body ?

Dr Terry

NES304

Is the mod plate for the 202?



mad56

Hows it going
Thanks for the information
The mod plate is for the motor and gearbox
Cheers Sandy