News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

0.002" undersize main bearings?

Started by ardiesse, July 08, 2016, 01:41:53 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

ardiesse

July 08, 2016, 01:41:53 PM
Hi all,

I need to cure a case of noisy main bearings - does anyone have a set of 0.002" undersize mains for a grey motor?
ACL makes STD, 0.010", 0.020", 0.030" and 0.040" undersizes. I was hoping, with the aid of Flexgauge, to mix'n match standard and 0.002" undersize shells.

Thanks (in advance),

Rob
Remember: if your Holden's not leaking oil, it doesn't have any.
Print
Go Up Pages1
User actions