News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

argon gas bottles

Started by GMHwagoon, March 02, 2016, 03:41:40 PM

Previous topic - Next topic

GMHwagoon



   wheres the best place to get welding gas   argon mix  for my mig
   is there somewhere in victoria that you can buy the bottles so l can cut out the monthly rent
      thanks greg

   

DJ

Here's one I went with, there may be others around (via Goggle).
http://www.speedgas.com.au/retail-outlet/
Euroa  0421 778 835
Horsham  03 5381 2100
Melbourne  03 9799 3188
Nhill  03 5391 3267
Dave
0417 270 315

FCRB26

I cant believe the mark up on gas.
My friend bought outright at toolies a e size bottle 400 ish dollars and they charge him 180 to refill it.
I use up to 300 bottles a yr but now pay 52 dollars for a large G size mig gas.

DJ

That's steep alright. It should gradually improve in time as more businesses gain appropriate approvals from the regulatory bodies. From what I understand, it's quite an ordeal to at the moment.

How much do you charge for refills?  ;)
Dave
0417 270 315

GMHwagoon



    Weighing up if l will buy a bottle outright and do away with the rental
    a swap and go system would be good .
    its just annoying that l payout more in rental
    than l use in gas
    l am only doing my wagon rust repair and the odd car club job  will get rid of it when the wagons done
    but thats a couple of years away
     

DJ

I cancelled my rentals, reduced the number of bottles & bought for the same reason - far less gas used over a longer term now.
I believe the bottles can be resold when you no longer have the need so buying isn't a complete loss.
Dave
0417 270 315

NES304

F$&@ rentals. I sent mine back when I left Newcastle dam near full. And they knew it too.

Total tools Traralgon Vic has outright $350 for the smallest Ar CO2 (d?) and that's what I will get.

Expensive but it'll last longer than a rental will coat



JB

Yup, mine went back 3/4 full when I had finished all of my welding... won't be renting again.
Total tools is the place to go in Vic, buy one outright and be done with it.

Next project this is what I am doing.

Cheers
JB
Phone +64 223509263

vmx-mxr

I wonder if Bunnings are considering adding Argon / MIGShield etc to the current line up of oxy and acetylene ?

BOC is a way too expensive !

NES304

They sell a silly little one litre that lasts as long as a fart



Billy Blackarrow

I just bought on Monday outright a 4 kg bottle of argon shielding gas    Bottle $314
                                                                                                Gas    $145
                                                                                                Total  $459
From SPEED GAS  www.speedgas.com.au they must have a dealer near you
BILLY
BILLY BLACKARROW

fink

Hey Greg,give Supagas a call,they're on the hiway in Somerton,i heard there prices are ok!