News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

bumper rubbers

Started by freddyc, December 09, 2015, 09:57:17 PM

Previous topic - Next topic

freddyc

does rares make the rubbers that go between the body and the bumpers???
fred
Townsville North Queensland

customFC


freddyc

alex I have these ones the ones I am looking for are the ones that go on the bumper bolt, sorry for the confusion>
fred
Townsville North Queensland

GMHwagoon



  go down to bunnings buy the black rubber door stops drill them out  there you go

zulu


As mentioned, the black rubber door stops may do the job, but if you want closer to original Speeds have these

http://www.speedspares.net/SK1004_p/sk1004.htm

Rare Spares? are now doing the special retaining bolts which often go missing
I was lucky enough to still have mine as they are a bit exy

http://www.ebay.com.au/itm/NEW-UTE-VAN-REAR-BUMPER-BAR-RUBBER-STOP-BOLTS-FOR-FE-FC-FB-EK-EJ-EH-HD-HR-HOLDEN-/161149958137

DJ

'Speeds' is the Rare Spares outlet in Canberra. Laurence is good to deal with. Same RS part numbers & prices.
The bolts on the other link sure are exy.
Dave
0417 270 315

mcl1959

I thought Fred was talking about the rubber spacers which go on the corners of the bumpers to get the "bumper to body" gap right
Ken

freddyc

yes that is the ones ken, maybe I should do my research better and get the right name for them.
fred
Townsville North Queensland