News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

rear wheel alignment

Started by dwortho, August 17, 2015, 08:08:03 PM

Previous topic - Next topic

dwortho

Hi all

I noticed on my 57' FE ute that the rear passenger wheel was nearer to the arch than the rear driver side (offset about 3/4') i have been told by a friend that this was how they came out the factory
I have looked at the springs and axle and don't see anything wrong is my friend right.

Any assistance on this would be grateful.

Cheers

Dave W

mcl1959

If all looks good in the rear and rear springs are not suspect then I would look at the front. Maybe a broken front spring or a mis located front spring.

Ken

dwortho

Hi Ken

Thanks for that, i didn't think they would come out the factory with a offset.

Cheers

Dave W

fc4me

hi ive got three fc utes and there all the same as you described but maybe not quite as much as 3/4 of an inch