Painting floor inside car

[graham_fuller]

Hi all what are people painting the cabin floor with to stop rust should it get wet?
Cheers,
Graham

[KFH]

Graham, I used POR15.  Turned out well.

Keith

[ekute]

Same POR15 -it makes the water pool nicely! I needed to seal front and rear screens better.

[graham_fuller]

Thanks for the feedback. Did you polish the floor first and did you spray or brush it on?
Cheers
Graham

[snuff69]

Have a look at KBS coatings website Graham. They do similar stuff to POR15 and a bit cheaper. Dave

[Ed]

upol raptor

[KFH]

I cleaned up the floor as best as I could with a wire buff on a 4 in grinder, cleaned it with wax and grease remover then gave the floor two coats with POR.  It is a bit like water and flows out nicely leaving a shine on the floor and creeps into crevices.  I also did underneath the floor pan.  That was a bit of fun lying on my back and getting the POR running down your arms.  I wore disposable gloves to keep the stuff off your skin.  If you get in on the skin it takes about a week to come off.  Acetone is good for cleaning the paint brush out.  A cheap $2 paint brush is all that is needed as it flows out and leaves no brisk marks.

Keith

[Not Happy Jan]

The KBS product is good. Also have used the POR 15 and cant really tell the difference... yet