Fuel Tank Repair

[abletec]

The fuel/petrol tank in my FC wagon is very dented but quite solid. I have started to remove the dents and it is coming up quite well. I have a question in that it has one particular side dent in the corner diagonally opposite the fuel filler pipe. It looks like it is factory pressed so don't know if I should remove it. Can anyone please tell me if all four corners should be basically the same or does one have a side pressing. I haven't got access to my wagon to see if there is a reason for the dent/pressing. I think a wagon van or ute would have the same fuel tank. Thanks.

[Errol62]

Wagon, van and ute all have the same tank body, just the filler necks vary slightly between ute and wagon at least so I believe. There aren't any non symmetrical pressings and all the four corners and sides are identical.

Sent from my SM-G973F using Tapatalk

[mcl1959]

All four corners of the tank are completely identical, no pressed in sections.
Wagon, van and Ute tank are all identical including filler neck.

Ken

[Errol62]

Makes sense about the filler neck Ken. I was thinking of FB wagon I suppose, not FE FC.

Sent from my SM-G973F using Tapatalk