News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Braided steel earth strap

Started by cam58tiger, March 24, 2015, 12:15:54 PM

Previous topic - Next topic

cam58tiger

Hi, can anyone advise part no. or dimensions for the appropriate braided steel earth strap for the battery in an FE/FC?

I see there are a few places reproducing them.

thanks
Cam

Stewy

Hi Cam,

Original part number for FE : Strap Assembly - Battery ground was # 7409590

This was replaced some time later and became # 7414982

Sorry I cant tell you how long an original one was.

The one I have on my wagon is about 400mm long.

Cheers Stewy   8)
No matter how much you push the envelope, It'll still be stationery

pbh0069

hi cam

just check mine in my FE SPECIAL SEDAN is also 400mm long

cheers Phil.

cam58tiger

Thanks Stewy & Phil. So I guess they are about 1/2" wide or thereabouts?

mcl1959

I would say more like 3/4 inch wide. Actually made of copper braid as well, not steel.

Ken

old-blu

 These are still available from most Auto Electrician  supplies. I purchased 2 genuine straps recently.  They are braided copper straps with correct fitting to attach to cylinder head & battery.  old-blu
6th, may 1958 "I was there".