Smiths Heater

[FE_UTE]

G'Day all

I removed a Smiths door type heater from an FC ute that had the engine removed.It is complete with demister ducts and hoses.
Where do I connect the hoses and do the demisters get screwed through the dash vents as they were on the ute. ???

Gary

[RET]

Gary,

The answer to your second question is yes.

I've had a look through my limited collection of grey motored engine bays, but don't have any shots that clearly show heater lines.  Sorry.

cheers
RET

[FE_225]

Hi Gary
With the water pipes, one gets plumbed into the side of the water pump . The other goes to a tap fitted to the side of the lower thermostat housing. Sorry, have no pix either.
The demisters get screwed to the dash vents as per the ute. I've got a diagram of this if you need, also a template for fitting the heater.
Cheers
Tony

[FE_UTE]

Hi Tony

If you could email me a copy of both that would be great.

Also got a mint Nasco Autoheat heater from the same farm hanging up in a shed.Dunno if you can shed any light on this it has a number M32051 or M32057 on the back and is similar to the Smiths.
 
Thanks
Gary

[FE_225]

Hi Gary
I've sent those diagrams, hope they help.
Cheers
Tony

[FE_UTE]

Thanks for the diagrams Tony

Cheers
Gary

[tmudie]

Hi Tony,

could I have a copy of those diagrams as well? thanks

Tony

tmudie@bigpond.net.au

[robbzfc58]

g'day guys
       just acquired a smiths heater.if anybody has a copy of components & or fitting instructions or anything else relevant i would be most grateful if i could have a copy.
  its missing control panel & tap but i'm prepared to make something to get by
                   thanks trev