Gearbox rebuild

[Harv]

It would need to look really mangled (say run dry), or heavily pitted (sat full of water). I've yet to see one bad enough that I'd sleeve it.

Cheers,
Harv

[moetstockie]

The second gearbox had a crack in the case and was suspected of being in a bingle and thereofre a bent shaft, hence jumping out of top gear. So they went back to my original gearbox and put a set of bearings etc through it. Total cost $650 for them to remove the box again, rekit the 1st box and fit. Has been going well for 3,000k's now. So I'm happy with that. Twas a bit of a stuff around but that's the chance you take with 2nd hand gear/parts I guess.   Cheers Moe`t

[GreyFC]

I have 2 of the older ones ( bell housing attached ) if you were in melb id have helped you fit it and if it was good $50.

[Not Happy Jan]

http://www.gumtree.com.au/s-ad/port-macquarie-2444/engine-engine-parts-transmission/fc-holden-gearbox-reconditioned/1070331061

he's trying to sell it now

[Not Happy Jan]

http://www.ebay.com.au/itm/HOLDEN-FE-EK-RECONDITIONED-GEARBOX-/261684514391?pt=AU_Car_Parts_Accessories&hash=item3ced9cce57

?????