RHF guard suit FC

[Gman]

Got stuff back from the blasters, guess who needs a RHF guard now  :( was waaayyy worse that I thought.. more bog than metal :o even the rust repairs have rusted out!

[fe350chev]

Moral of the story is perhaps be selective as to what bits are blasted next time cos sometimes even perfect looking guards are suitable just to lightly strip and ignore what's underneath. Especially a bolt on part. What I find good to use is a cheap variable speed polisher with 80 grit disc to strip them rather than blast. But perhaps just a light blast might be ok but you need to have a good blaster for that. I'm largely in the same boat 😏.

[GMHwagoon]

gman get back to work and do something

   l will have a look in the shed

         

[Quick EH]

I have a good one in the shed in SEQ $150 has been repaired at the bottom. You can email me if interested.

[Just40]

toowoomba swap meet this weekend.

[Gman]

Thanks for all the replies guy, picked one up from greg, looks great, thanks again

[fe350chev]

Well done gman. Be gentle with it 😄