FLOOR PANS

[titch]

HELLO  .  
I AM ABOUT TO REPLACE THE FLOOR PANS IN MY FE AND I AM WONDERING IF ANYONE CAN TELL ME  WHO SELLS THE BEST ONES  AVAILABLE  OR WHO SELLS BAD ONES SO I DONT PURCHASE THEM
PLEASE HELP . :)

[JB]

Hi Titch,

I used the Rare Spares floorpans in my Ute and my Panelvan... Not quite perfect but do the job.

Regards
Jason.  :)

[BrendanC]

I agree with Jason, the Rarespares ones are readily available, reasonably priced, and they do the job.
I replaced three out of four on my FC sedan and had no problems. Not quite a perfect match on the floor contour but good enough to stop your feet from draging on the road. ;D

Chow,
BrendanC

[titch]

Thanks brendon and jason for your replies
I  am thinking of looking at a set from Harrison spares , has any one used  these ones.
Would it be better to find a wreck and cut the floors out of a vehicle  :D

[HARKO]

I dare say Harrisons make the ones for rare spares or visaversa so check the prices if your going to go that way,They are much thinner than originals so make sure you replace all your rubbers too and stop the cause because these ones will rust out in half the time, if you like perfection these just dont cut it so if you find another body that you can get pans out of go for it but keep in mind that most FE-EKs with a good floorpan will be good enough to save rather than destroy, Just some food for thought -  :)