News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Seatbelt

Started by xwolfkvltx, July 02, 2014, 10:32:29 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

xwolfkvltx

July 02, 2014, 10:32:29 PM
Hi Guys, what does everybody usually do with seatbelts in fc's, has to be able to pass engineer inspection. Thanks in advance

NES304

#1
July 03, 2014, 09:42:52 AM
My engineer wants a unf nut welded to a 3mm plate 75mm x 45mm. Larger if two points going to it (100mm x 100mm) and then stitch welded or plug welded to the body.

Check with YOUR engineer first. Some interpret the rules differently.

Here's the big one


NES304

#2
July 03, 2014, 05:28:26 PM
There may be an easier way to slip em into the pillar though...
Some guru here might put some good guts info up


Print
Go Up Pages1
User actions