HR front end with HT discs

[DN2168]

I am about to start rebuilding a HR front end for the Ratty Taxi, I have a set of HG,K,T stub axles and steering arms. I know they bolt on and lower car by about an inch. What problems could I encounter with this setup eg, alignment issues ect ? Any help appreciated

[mcl1959]

The conversion is OK but use the HR steering arms instead.

Ken

[hsv-001]

That's right the steering arms curl inward more because the HK,T,G track is wider allowing the inside wheel to turn sharper than the outer so fitting on a HR front end can cause exess scrubbing when turning .Haydn

[DN2168]

Thanks for the help Ken & haydn.