News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Holes for Wagon Rear Qtr trims

Started by JOX515, April 07, 2014, 09:08:26 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

JOX515

April 07, 2014, 09:08:26 AM
G'day all,

Doe anyone have a photo of both rear qtrs. of a wagon showing where the holes are meant to be for the stainless trim?  Appears a couple of mine have been filled over.....  And I am guessing that the "push on" clips are the ones to use here and there appears to be no access for screws and nuts from the inside.

Cheers, Graeme

Stewy

#1
April 07, 2014, 04:24:55 PM
http://fefcholden.org.au/forum/index.php/topic,22928.msg140299.html#msg140299
Hi Graham, Pedro asked this question last year.

Cheers Stewy   8)
No matter how much you push the envelope, It'll still be stationery

GMHwagoon

#2
April 07, 2014, 04:45:45 PM
graeme
    have sent a pic and measurements
  hope it helps
    greg

JOX515

#3
April 07, 2014, 05:17:41 PM
Thanks Stewy and Greg
Print
Go Up Pages1
User actions