News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Battery position

Started by ted, February 09, 2014, 09:27:17 PM

Previous topic - Next topic

ted

HI Does anyone know which is the correct position of the battery in stock fe
Do the terminals sit on the engine side near the battery holder or are they on the lh inner guard side
Thanks for any advise
Ted

mcl1959

Terminals near the retainer,  it's the only way the leads will fit with the battery pole diameters being different.
Ken

ted

Hi Ken
Thanks for your reply
I have seen many photos on different cars with battery in both positions ,with the positive terminal towards the starter motor

Regards  Ted

hsv-001

The original battery bracket has a steel clip welded to it to carry the negative lead. Haydn

mcl1959

Ted check out original photos of period cars for the correct information. Batteries from other cars have different pole diameters and positions and can be adapted to fit with creativity. Correct original position is with poles towards the retainer.

Ken

mickrat

Battery pole identification.  The large pole is always the (+) positive one and the small pole is always the (-) negative one !!
1957 fe special sedan    (rusty one )    1958 business sedan   ( good one )   

                                            .

ted

Hi Thanks to all for your replies
Ted