Rear divider mould

[DJ]

Still after a pair (or even one) of these elusive suckers. If anyone has come across any recently that they wish to sell I would love to hear from you.
Dave.

[hsv-001]

I'm sure I have 1 somewhere but I used fe door card moulds on my van . I am in the process of putting a flash on the sides of my VW project and noticed that the later beetle side chrome strip [the thin one] is much the same profile and can be slid on over 6# self tapping screws will get you photos tomorrow . Cheers Haydn.

[DJ]

Thanks Haydn.

[FCRB26]

Ill check my stash tommorow for you..


Pete

[DJ]

Thanks Pete

[hsv-001]

As I was saying last night , I have one original ,it seems to have a mark where the bumper has been pushed against it. On my van are FE chrome strips off the door cards [shown in photo]


they are easier to fit anyway .Also have 2 chrome  offcut  strips off late VW beetle which is the same profile that can be fitted directly over 6# self tapping screws or a piece of doorcard chrome strip . Which ever suits you. Cheers .Haydn

[DJ]

Haydn,
Thanks a lot. Will be back home tonight & reply. Leaning towards the 2 chrome off cut strips.
Dave.

[fcwrangler]

Dave, if you are still after a pair of the dividers,I did a clean up and found a set.
Jim

[DJ]

Jim,
Thanks, please fwd details for payment. A photo would be great if possible.
Dave.

[DJ]

Haydn,
Many thanks for your help. I may have been exceptionally luck withe a couple on offer from Jim. I'll try of this original pair.
Dave.

[DJ]

Ill check my stash tommorow for you..


Pete

Pete, I could be OK after all. Thanks.
Dave.