News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

cowl vent cut

Started by Gordon, November 04, 2013, 02:12:40 PM

Previous topic - Next topic

Gordon

Hi after a good rustless cowl vent cut, anyone ?

FCRB26

Ill check my 3 wrecks down the back tonight

DJ

Long shot - in Orange NSW.
Have only spoken to the owner once, nothing much left that I needed.
If it's likely to be of any use I can PM phone number.

Dave
0417 270 315

FCRB26

Cut mine out has some little oysters ill bead blast tommorow let you know
No pin holes and the bit where the seal goes is clean.



Sent from my GT-I9505 using Tapatalk

FCRB26

Hi Gordon

Oyster went thru she has a heap of holes in it now.

Sorry
Pete

Crumpsnr

Hi, I'll join the hunt too if it's OK to jump on someone else's post. You mentioned a while ago you might have had one Pete so I guess that was the one that's now lace!  The vent I have is in great nick, I need the cowl surrounding it. I'll give FC253 first shot at the one in Orange being the OP. Regards, Martyn