Smiths clock bracket

[zulu]

Hi Pete,

If all goes well with it, I'll be ordering 2 please

Cheers, Gary

[FCRB26]

A big thanks to ken beutiful drawing good detail



Will work out price folded 4.60 to cut say 6.50 for flat plus postage ill do a run of 10 tommorow to get us started im not in it for any money just helping people out.

Pete

Sent from my GT-I9505 using Tapatalk

[FCRB26]

Modified as Ken picked up the rh hole was in the wrong position.
Really wanted to sell as a flat pack.
But it would be near impossible to get all the bends at home.
I had to use one of our custom nothed out press brake blades.
So will have to work out a price complete and finished



Pete

Sent from my GT-I9505 using Tapatalk

[ridgey_didge]

Looking good!  Let me know when you have the pricing done!

Cheers
David

[mcl1959]

Looks pretty good. It would be valuable to do a mock up now with a mirror stalk and a clock.

Ken

[FCRB26]

I will send a sample to you Ken to try..


PM me your address i threw the envelope out not thinking.

pete

[mcl1959]

If I could suggest maybe David (ridgey didge) or Gary (Zulu). I sold my clock to Dave. I can check the mirror stalk fit but not the fit of the clock in the frame

Ken

[FCV08]

Pete

I am happy for you to fold one up for me.

PM me the price all up.

Thanks

Craig D

[FCRB26]

Ill get one away today for trial fit.

Craig i havent forgot your other parts..


Pete

[FCV08]

Not a problem Pete

All in good time.
Thanks
Craig

[DJ]

Ill get one away today for trial fit.

Craig i havent forgot your other parts..


Pete

Pete,

If it helps, I can post you the clock I bought from Ken so you can check the fit in your shop.

Dave.

[FCRB26]

I sent one off today to ridgey_didge  to trial fit id rather that than have to worry about a clock in transit.


Pete

[DJ]

Fair enough. Can I order one also please.
Dave.

[FCRB26]

Sure can when i make sure the radius is right.

Pete

[zulu]

Pete
See how David goes if you need it I have an original case you can copy from
Gary

[FCRB26]

Thanks for that.

Fingers crossed it ok as its the only V on my V block i can successfully get all the folds.



Pete

[ridgey_didge]

Thanks Pete - the bracket has arrived and looks good.  It is a slightly tight fit to get the clock into the bracket, but should be OK.  I have noticed for the first time that one tab on the frame of my clock is folded inwards and needs straightening before I should attempt to get the whole unit into the bracket.  I will take them home to where I have the tools I will need to ease both bracket and tab - then to see how they line up in the car.

Watch this space....

Cheers
David

[ridgey_didge]

And here she is:





After easing the bracket open just a slight amount it all fits together well.  The photos show a loose fit up and the clock not the last few mms into the bracket, as I just wanted to be sure of the fit before doing a final tighten up.  In any event, I will now paint the bracket in brown to match the mirror and my interior colour scheme.

Pete, you're a wizard with that water cutter thingo.  I am really happy to be able to now fit the clock and add a desirable accessory to my car.  Please let me know what I owe you for your time, trouble, postage and skill!!

Very happy,
David

[mcl1959]

David the clips on the clock look wrong. Do you have them this way on purpose or it was just in mock up stage?
Ken

[FCRB26]

so are the radiuses right ect ect?

Free for you your the guinea pig..



Pete