News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

removal of windows from fc ute

Started by fc179, September 21, 2013, 11:02:04 AM

Previous topic - Next topic

fc179

I have a wrecked fc ute which has windows i want to remove. What is the best way to remove them without breaking them :-\

mcl1959

Unwind the window about half way down. Undo the screws from the window rgulator, and slide the regulator out of its retainer at the base of the window whilst pushing the window back up by hand from the bottom. Remove the regulator.
Remove the nut holding the base of the window channel between the window & the quarter vent. If you can wind the bolt in this will be helpful but usually they are stuck. Gently let the window drop to the bottom of the door, then flex the channel away from the window until the glass is free.
Now you should be able to remove the glass without scratching it.

Ken