News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

FC Diff

Started by EJ208, September 11, 2013, 09:13:58 PM

Previous topic - Next topic

EJ208

Hey guys,

I am currently building an early model Holden group Nb race car and I am looking for a few parts without buying whole vehicles. Specifically I am chasing an FC diff drum to drum with a 3.9:1 centre. I am located in Brisbane. any information or leads on parts greatly appreciated.

My contact details are 0438 643 412 or rhys.ward@santos.com

Thanks,

Rhys

colt

Rhys, if you need the whole housing I cant help you, however I have several 3.89 grey centres here. A lot of the guys go for 4cyl Torana or Sunbird centres which are 3.9 ratio but take the later style 6cyl uni joints. It is as simple as changing the rear uni joint. I don't know if I would use the original bolt up job. By going Nb you should be able to change this without having eligibility hassles.

Colin.

BTW, I'm in Canberra. You should be able to find a diff up there?
colt