News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

oil pump gears

Started by jimbo492, May 07, 2013, 03:39:49 PM

Previous topic - Next topic

jimbo492

anyone know where to obtain oil pump gears? regards jimbo492

Trevor_B

Hi Jimbo,
Grey Oil pump gears are scarce, we did have a couple of sets at last year's VIC Club Auction that went for close to $100 each.

A guy from the FB-EK Club in NSW has tried retro fitting red motor oil pump gears into a grey pump - it is possible with minor machining....

One of the guys in the VIC & Wangaratta Clubs (he drives a yellow FE Panel Van  ;)) is currently attempting this modification but is yet to complete a unit. He has done the machining and yes, the gears can be installed by machining down the shafts. He is investigating the relief valves and will then bench test to check pressures etc. When he has done the testing he will advise how it is done.

Let me know by PM if you want a copy of the "instruction" on how to modify the oil pump to suit the red motor gears if you want to try it yourself.

Cheers,
Trevor_B
FC Sedan, Ute & Wagon .... only a Panel Van required to make the set

jimbo492

I would like the instructions  , thanks for your help. regards jim

Trevor_B

Hi Jim,
email sent  :)

Cheers,
Trevor_B
FC Sedan, Ute & Wagon .... only a Panel Van required to make the set

jimbo492

trevor B, received info thanks very much, regards jim

KFH

KFH received the info also.  Thanks

Keith
I was born with nothing and still have most of it left

newman


Good on you Trev for the email, made very good reading ;)

Mick 8)