Fc special trim clips

[DN2168]

Max must be kinky  ;D.

[Not Happy Jan]

Yeah...
Under dash parcel tray... That would be cool!
Nick

[john253a]

what die do you currently have the pulmax, some people might intersted

[FCRB26]

I was using it for beading a lot
But now i use the speedwerx bead roller with variable speed as doing radiuses is a bitch with the pullmax.
I cut all my own design dies on the waterjet .
I have the die at work i was trialling to do the W style section for FC floor pans.
I have a louvre punch for it and dishing dies as well.
really need more time to play in the shed with it i used it a lot at tafe doing my apprenticeship.
You can get extremelly sharp sections with a pullmax but check out the ones below how sharp they are .

[john253a]

thats the nice thing about the water jet you can calculate for the material thickness,
i also havent use since my app, we had to make our dies by hand,
because of cost i just use a rack and pinion press for the small jobs and pay mega $$$ for the bigger stuff

[FCRB26]

I bought 10 dvds on manufacturing different dies I watched ten minutes of 1 oh so boring his voice pitch did not change once.
I'll try watch again with iPod blaring .
Some good ideas.

[FC427]

Pete What size louvers can it do I only need two for the top of the International dash to direct the demister towards the windscreen  I cut some from a metal locker but were to short  :'( :'( I need them to be 150mmm long in a overall section of 180mm x 30mm  can you help me out Thanks Mark

[FCRB26]

As long as you want the lower die swivels left to right to end your louvre.


I'll do 1 and take a pic .

[FCRB26]

I have cut seat trim clips this morning .
I will trial them tonight cut very nice and are not brittle like the factory ones.
I will have to do a catalogue up.


Sent from my GT-I9305T using Tapatalk 2

[NES304]

I will have to do a catalogue up.

Careful.. the requests may be great in number OR Holden may shut you down!!

[FCRB26]

Ha ha if your chasing grille badge inserts I bought a heap from a supplier before they were shut down.

[FCRB26]

Weird  day something like 4 number plate brackets and about 8 sets of trim clips.

Have posted all items that were requested yesterday.

More to post tommorow.

Pete

[john253a]

thanks the the nice work and workman ship
i was after 2 set but 1 will do, i always seem to break the last 1, or some wants something and im like this will do the job nicely, then when i go to install, theres a few minutes of head scratching, and a where is it i no i had a full set,

but ill get them on the next run

[FCRB26]

There's an extra just in case.

[john253a]

thanks all arrive and look a1 even fitted through the mail hole
nice work and thanks

[FCRB26]

Sorry mate i didnt understand your msg you sent back im the PM so i only sent 1 set.
If you lose or need any more ill shoot them thru next day we cut a heap today.

1 Thing i found some are tight on some of the trims so they may need a small file or sand where they slip into the stainless and some are loose.

The new ones are a little thinner as well from the first batch.

For those who ordered flat ones find a vice with a crisp edge do the clip up in there with the bottom of the radius of the clip flush with the top of the vice simply push over and get a piece of flat bar or something like that and give a gentle tap down so it has a sharp 90 degree fold.
Ill Post a pic if anyone wants.
all this batch are folded $14 still saves a lot of stuffing around works out $3 for folding $1 for the padded bag.
Not really making much off em just trying to help people out as theres some dodgy solutions out there.

Pete

[FC427]

Sorry mate i didnt understand your msg you sent back im the PM so i only sent 1 set.
If you lose or need any more ill shoot them thru next day we cut a heap today.

1 Thing i found some are tight on some of the trims so they may need a small file or sand where they slip into the stainless and some are loose.

The new ones are a little thinner as well from the first batch.

For those who ordered flat ones find a vice with a crisp edge do the clip up in there with the bottom of the radius of the clip flush with the top of the vice simply push over and get a piece of flat bar or something like that and give a gentle tap down so it has a sharp 90 degree fold.
Ill Post a pic if anyone wants.
all this batch are folded $14 still saves a lot of stuffing around works out $3 for folding $1 for the padded bag.
Not really making much off em just trying to help people out as theres some dodgy solutions out there.

Pete

I found  a few NOS GMH ones when I was cleaning up if you would like to measure up an original I can post one up to you ......FC427......

[FCRB26]

Thanks for the offer, It should be right as i had a couple of mint ones i measured off.

Pete

[FCRB26]

Please email me if you have not recieved your clips ?

Pete

[GMHwagoon]

pete

go the clips in the mail friday  thanks heaps
       greg