FC Ute

[DJ]

Nice work, as usual Pete...

absolutely

[FCRB26]

Finally sorted the coil overs as the v6 conversions ones are spewing out oil and his 350lb springs are less than 200lb

So i got some new ones off ryan at united speed shop.




Sent from my SM-G920I using Tapatalk

[NES304]

Standard V6conversions

[JB]

Did you front end come with a sway bar Pete? If it didn't, I would get one.

[FCRB26]

No it didnt but i left the mounting points in the subframe for that reason.

I have a plan to fit a sway bar.


Im very tempted to rip the front end out and change it tho making me cranky i would never buy another one thats for sure.

[JB]

I knew about the one you had for the rear but not for the front.  ;D

[FC_fer_me]

Had the same problem with the AVO shocks, kept chewing up bushes. I also changed to QA1 shocks and springs and haven't had a problem since. No wonder no-one wants to stock AVO's in Australia!
Jack

[FCRB26]

Same old story here not enough hrs in the day im struggling to find time to re assemble ute.
Cut up a 900 dollar radiator to make it fit properlly.
The inlet and outlet were on weird angles so chopped them off and fitted new ones with a doughnut on the lower to make it look pretty.
I have the tool to swage the necks to make them look factory.
I used a copper vk radiator to set up the car so i bought a pwr direct replacement and it was no where near direct replacement.
Lower pins were different and the necks also its slightlly taller
Should of stuck with copper but i wanted the alloy look.
Also Qa1 coilovers didnt come with spanners so i cut my own out.

Attached is a pic of the v6 conversion coil check out the bushes brand new never driven on completely collapsed.







Sent from my SM-G920I using Tapatalk

[FCRB26]

Well i got the radiator support and cover panel all fitted beutiful very very happy.
Booster will be painted body colour.




Sent from my SM-G920I using Tapatalk

[snuff69]

Gee that looks NICE

[Longman]

Thats beautiful Pete.

[Errol62]

Work of art


Sent from my iPhone using Tapatalk

[Old_Mt_Isa_Boy]

Yes indeed

Regards

Wayne b

[Stewy]

Not bad for a work ute that was only going in for a tidy up.  :D :D :D
Looking fantastic as always Pete, your attention to detail is great to see.

Cheers Stewy   8)

[FireKraka]

As always Pete what can you say "amazing"

Regards
Neil H

[DJ]

Very nice work Pete.

[NES304]

That's it I'm coming for a look!!


Sent from my iPhone using Tapatalk

[Longman]

That's it I'm coming for a look!!


Sent from my iPhone using Tapatalk

Me too! Meet you there.

[camxsmith]

Peter again the same response ..  just brilliant ..  I'm actual get sick of saying it or trying to come up with another way of saying it...   ;)

[FCRB26]

Thanks for the kind words.

Drew up a alternator bracket today did a little bit of engraving on it.

Might have to fatten it up around where the bolt goes but its only a small alternator with a V belt



Sent from my SM-G920I using Tapatalk