News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Repaired steering wheel

Started by Mc Bean, November 24, 2012, 06:49:08 PM

Previous topic - Next topic

Mc Bean

Hi Guys,
Just primed my first attempt at a steering wheel repair, so far so good put some force on repairs and holding well.

 






Solar spray booth working well.





Tried this Knead It from Bunnings,after veeing out the cracks, sets rock hard but surprisingly easy to sand.
All going well I will Paint it 2 pack black tomorrow.
Andy

NES304




hsv-001

i have repaired quite a few steering wheels . here's some  ideas.Grind  out any cracks and clean well . most two part fillers are basically the same chemicals only with different amounts of talc to make them easier to work [sand] .i usually paint a sealling coat of water based acrylic [house paint] . this acts as an isolator .then you can dry spray whatever colour you wish and finish with as many coats of clear as you want.