News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

FE Identification Plate Help needed.

Started by jwm, December 30, 2012, 01:30:38 PM

Previous topic - Next topic

jwm



I've seen a few other Identification Plate details posted on the site, so I thought I would try and find out the details of my vehicle.

As I read the details on the Identification Plate, they are:

FE 22584138  I think the 8 has been re-stamped and it should be an S.

Trim 4/882240

Paint 253/6258

As I work it out:

FE-Special Sedan- No. 8413- Sydney

Paint: Duco/Lacquer - Gloss Black

But the trim code really has me scratching my head, can't work that one out. Any help would be appreciated.


Stewy

Hi, looks like 4\ 682 A to me
682 is Fall Red which I think is common to single colour gloss black cars

over to the Guru's  ;D

Cheers  Stewy   8)
No matter how much you push the envelope, It'll still be stationery

jwm

Thanks Stewy, I thought it might be 'Fall Red' but the rest of the code threw me. Hopefully some one more knowledgable might know the answer. I went and rechecked the plate and it looks like a lot of the initial No's and letters have been restamped. 

mcl1959

The trim number is 4/582 AO. The trim should be the FE special material with Fall red in the lower section and Fall red in the inserts as well. This trim only exists in black cars.
The other peculiarity with this car is the use of silver or red paint on the interior panels instead of standard black.

The AO is for Sydney cars only which apparently used a different trim supplier and therefore some subtle differences exist between Sydney cars and cars made in other states.


Ken

jwm

Thanks Ken, that explains things.

Unfortunately, the interior paint colour is now black and the seats are in the main a red colour with a black panel along the top of the seat.

But gee, it's nice to know it's history and how it started life.

Your knowledge and expertise is very much appreciated.

jwm

Stewy

Hi John, history says your front seat would have looked like this one with the stitching pattern but only the single colour




This one is fall red and parchment ivory #465 or #568 or#703 or#728 or#838 or#849

Cheers Stewy   8)
No matter how much you push the envelope, It'll still be stationery

jwm


mcl1959


NosFEratu

Hi jwm

My FE's code are single black with fall red trim.  I know the complete history of my car as it has always been in my family and all interior panels on my car were black from the factory.  Yours may well have been too.  :)

Kathi
NosFEratu

NosFEratu

Forgot to mention......

welcome to the Black FE club  ;D
NosFEratu

jwm

Thanks guys, your input and knowledge is very much appreciated. Have a Happy New Year.

jwm