News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Stub Axle Identification

Started by Glenn 'Stinky' Stankevicius, January 20, 2013, 11:54:42 AM

Previous topic - Next topic

Glenn 'Stinky' Stankevicius

I have a couple pairs of stub axles I want to ID, can anyone help?

First pair marked
HOLDEN 34647 & HOLDEN 34648

Second pair marked
HOLDEN 49811B & HOLDEN 49812B (I think, the casting is a little blurred)

mcl1959

Photo would be better - are they disc brake or drum brake?
There are only 3 types of disc brake stub axle and even less drum brake when you separate kingpin and ball joint types.

Ken

Glenn 'Stinky' Stankevicius


mcl1959

The second one from the left appears to have a Torana steering arm

Ken

Harv

Stinky,

According to Google, HOLDEN 49811B is LC/LJ left knuckle (stub axle) and HOLDEN 49812B is respective right knuckle. Couldn't find the other two though.

Cheers,
Harv

hsv-001

Yes,those numbers may be lc lj but you will find that steering arm to be lh lx .The later Torana arms drop lower and are straighter,hence less scrubbing of the outer tyre when turning.This was also improved  when the upper balljoint was moved back a few mm,s.Like I said call it RTS if you like.If your wife has a laundry trolley and you bend the axle down in the middle with your foot it will have the same effect.

Glenn 'Stinky' Stankevicius

Quote from: Harv on January 20, 2013, 10:13:23 PM
According to Google, HOLDEN 49811B is LC/LJ left knuckle (stub axle) and HOLDEN 49812B is respective right knuckle. Couldn't find the other two though.

That would make sense as I have a bare LC front crossmember and not much else of it. So that is the set on the right.

That would make the set on the left most likely LH/LX, are any of these of any use on a HR front end?


hsv-001

Yeah,lc lj are identical to hr, and the lh lx I believe are only slightly different in axle so no problem

hsv-001

Oops sorry, meant to say axle height.All these early disc brake stubs are interchangeable,but be carefull of the inclination and axle height[top balljoint and calliper clearance.

mcl1959

Axle height is the same but inclination is different, Torana stub axles on a HR front end can cause bad tyre wear and upset steering geometry.

Ken

Stewy

Torana stub axles on a Torana front end can cause bad tyre wear and upset steering geometry !  :D :D :D

Stewy   8)
No matter how much you push the envelope, It'll still be stationery