News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

1/4 Window Vent Bottom Clamp

Started by Rod, September 30, 2012, 10:27:52 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Rod

September 30, 2012, 10:27:52 AM
Hi All. I am in the process of doing up a couple of doors which includes new rubbers and bottom clamp for the 1/4 vent windows. I have given the forum a thorough search (there are many posts) but haven't been able to find the answer to my query. The purpose of the clamp at the bottom is to regulate the tension and apply friction to the pivot in order to keep the window open. My question is should I apply a little grease to the pivot post to prevent wear. The trade of it will minimise the friction. Thoughts would be appreciated.

Rod

FCRB26

#1
September 30, 2012, 12:20:31 PM
I put never sieze compound on mine.

mcl1959

#2
September 30, 2012, 03:27:13 PM
Grease is OK - the tension in the clamp will work fine and the action will be smoother as well.

Ken

Rod

#3
September 30, 2012, 06:28:48 PM
Many thanks Pete and Ken. Cheers Rod
Print
Go Up Pages1
User actions