News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

rear door stops

Started by Sparkie, July 20, 2012, 07:52:32 PM

Previous topic - Next topic

Sparkie

hi restoring late fc and fitting up rear doors and realise i have nothing to limit door when fully opened.

















hi,am restoring fc and fitting rear doors and realise i have nothing to limit or stop the door when fully open .Is this part available or is there a modification i can do,any assistance would be appreciated thanks Gary















black57

Do you mean to stop it closing by itself? If so, there are springs in the door that keep it open. These break over time. Someone on the forum sells replacement ones but the doors need to be removed to fit them. I can't remember whom it is, but hopefully someone will pick up on your post. If not try nascohunter, he either sells them or at least knows who does.

Pinky.
A car on the road is worth 2 in the shed...
FE Standard rat rod
1965 GSM Dart - ex race car
1948 Singer 9
1954 Sunbeam Talbot drophead coupe
2 1960s custom fiberglass race cars

FCRB26

Rear doors need the flat bar restraint that goes into the pillar  springs are on the front doors.

you will see the steel cover on the pillar.

Sparkie

thanks for answers ,i have nothing in the way of these parts including no plug in pillar also spring clips on front hinges also gone ,i will do some hunting ,thanks