News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Heart Transplant - adding 172ci

Started by NES304, July 16, 2012, 12:50:07 PM

Previous topic - Next topic

NES304




FireKraka

Hi NES
Yes I agree I also wanted to be able to run an FC cap and not the terrible plastic one.
Regards
Neil H

FC 304 wannabe

I have found that a harley Davidson lockable chrome plated fuel cap fits the commodore necks good...
And if you find a plain one without badging on it .. it looks like an old fc one..
Cheers
Shannon

NES304

Quote from: FC 304 wannabe on November 21, 2014, 08:56:04 PM
I have found that a harley Davidson lockable chrome plated fuel cap fits the commodore necks good...
And if you find a plain one without badging on it .. it looks like an old fc one..
Cheers
Shannon
Sounds like a good idea Shannon, Are the commodore caps vented or non vented? Closest thing I can find is one with a lock on it...



fe350chev

Excuse me, I have a few questions. Have you paid off that steering column yet? Have you found a VX donor yet? Also, can we pls have a pic of the whole car, as it stands atm?

Cheers

Deano.
Deano

Current Rides: 1958 "Black and White Taxi" FC special Sedan, 1957 FE special Sedan, BA Futura,  2015 VF Commodore, 1956 Austin Tipper Truck

NES304

Quote from: fe350chev on November 30, 2014, 08:55:30 PM
Excuse me, I have a few questions. Have you paid off that steering column yet? Have you found a VX donor yet? Also, can we pls have a pic of the whole car, as it stands atm?

Cheers

Deano.
What are you on about Deano?
Yes column.
No need for VX donor car as they were never produced with a 304ci 5L and not looking for one.
No. it's 11:44pm and it would show custom steering stuff and brackets that are not ready to be photographed



fe350chev

I though it's been a while since you bought a donor that's all 😚. I actually read your thread from the start cos a few thread I get confused with etc and I forgot about the column. I've started thinking ahead to mine and was wondering how the angles went and whether some uni's work better than another. You know how you said ages ago that the big loom coming through was a bit cumbersome or something, would you have done anything different. I have been toying with the idea of running a battery in the boot area and having a fair few wires coming from there. But I won't be running a factory fuel injection, I'm thinking of adapting LS heads to the sbc. Any thoughts on this at all?
Deano

Current Rides: 1958 "Black and White Taxi" FC special Sedan, 1957 FE special Sedan, BA Futura,  2015 VF Commodore, 1956 Austin Tipper Truck

SC00P

Unreal progress over the last week mate!!!  :)

NES304

Quote from: SC00P on December 04, 2014, 09:47:35 PM
Unreal progress over the last week mate!!!  :)

No idea what your talking about  ???



fe350chev

NES, can you see my questions? Just take the compliment and run  :D
Deano

Current Rides: 1958 "Black and White Taxi" FC special Sedan, 1957 FE special Sedan, BA Futura,  2015 VF Commodore, 1956 Austin Tipper Truck

NES304

Quote from: fe350chev on December 05, 2014, 10:38:53 AM
NES, can you see my questions? Just take the compliment and run  :D
Not when I'm drunk and in a texting fight with Sc00p!!!



fe350chev

Hmmm. Been trying to decipher that shenanigans but was missing bits in btw.
Deano

Current Rides: 1958 "Black and White Taxi" FC special Sedan, 1957 FE special Sedan, BA Futura,  2015 VF Commodore, 1956 Austin Tipper Truck

fe350chev

How did you go with a cap. Do you have a pic Shannon? Did you find out about the commo cap venting NES?
Deano

Current Rides: 1958 "Black and White Taxi" FC special Sedan, 1957 FE special Sedan, BA Futura,  2015 VF Commodore, 1956 Austin Tipper Truck

NES304

Been slow. Fuel tank mods done and a helper to paint




FireKraka

There you go mate get the helpers out there if they want to ride they have to help is that how it works.

Have you been busy with work NES you do seem to have slowed a bit dont get disheartened mate.

Regards
Neil H

NES304

Busy with work. Been out for a bit with some little cancers on my head too. Not disheartened just need time!!
McBean took the welder back but not before I could tac up some mandrel bends for headers. Doing 1 3/4 primaries into 2 1/4 secondaries and two 2 1/2 pipes all way to back with one cat and one muffler each bank and a crossover in between.

Here's the start
45deg dumps at back.






fe350chev

Well I hope my 15 year old boy starts helping a bit. He seems to have got interested all of a sudden now he is doing small engines at high school. He chose a tech school over private school but still doesn't know what he wants to do. Do yours have any idea? I can't remember their ages. She is doing a neater job than you bahahaha. Get her welding next. The best wife is a wife that can weld........but I never found one ;)
Deano

Current Rides: 1958 "Black and White Taxi" FC special Sedan, 1957 FE special Sedan, BA Futura,  2015 VF Commodore, 1956 Austin Tipper Truck

NES304

Funny you should mention that. My daughter is senior wire solder and I asked my wife if she wanted a go on the Mig!



fe350chev

Yeah my young bloke likes soldering. It's good to expose them to different things so that they can have an idea of what future choices are out there. I thought you might say "my daughter is not going to date boys". But my boys are turning out to be much better than I was at their age. Do you have a before pic to slip in front of that one. I'm going to start doing that on my page a bit more to save people scrolling.
Deano

Current Rides: 1958 "Black and White Taxi" FC special Sedan, 1957 FE special Sedan, BA Futura,  2015 VF Commodore, 1956 Austin Tipper Truck

NES304

My Daughter is 12, i'm in for a long road :'(