News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Heart Transplant - adding 172ci

Started by NES304, July 16, 2012, 12:50:07 PM

Previous topic - Next topic

KFH

Look like Nasco still make the original bonnet supports
I was born with nothing and still have most of it left

JB

You just have to get in in here now...  :P



Phone +64 223509263

NES304

And suddenly your thread means so much more to me. Stayed up a little too long last night re reading it and "here we go again" and "first go at it"



NES304

Quote from: fevanv6 on August 26, 2012, 10:30:55 PM
You just have to get in in here now...  :P




Oh you mean like this????



FCRB26

Probablly wanna pull air con and alternator off before you try to hard

Ed

Quote from: fchoon on August 29, 2012, 01:37:25 PM
Probablly wanna pull air con and alternator off before you try to hard

plus all the other extraneous crap on it... it's a tight fit, the required 10mm clearances will seem generous.

in the shed

JB

Yup, power steer pump, air cond, alternator... All don't fit. Not sure about the headers either...
Phone +64 223509263

JB

Forgot to mention the sump as well...
Phone +64 223509263

michaeljohn1234m

has anyone used or heard about these axels,good price and just cut to length and fit a commadore diff
http://www.ebay.com.au/itm/320965959476?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649

Mc Bean

Hey NES

When you get the shits with the 5L and throw another tantrum,spit the dummy & chuck a wobbly as before.
Don't panic because I have put aside a motor at work for you to try next.







Andy

NES304

Quote from: fchoon on August 29, 2012, 01:37:25 PM
Probablly wanna pull air con and alternator off before you try to hard
Yeah the SS is right in front of it and when I spun it round to drag it away I thought a good photo opportunity. I know about all the removals of extra bits and want an auto gearbox (to keep the misses happy).

I am so much more happy with the conversion now even if it is costing extra and will definately be happier in the long run.



zulu


Wow, Mc Bean, now thats an engine

a V16 .........paxton ?

NES304

Quote from: michaeljohn1234m on August 29, 2012, 04:07:51 PM
has anyone used or heard about these axels,good price and just cut to length and fit a commadore diff
http://www.ebay.com.au/itm/320965959476?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
ProMac at cardiff will cut the ones I have to suit for $143 per side



pedro

Nice looking engine NES, should have a bit more grunt than the grey ;)
          Pedro
I love animals - they taste great

F4+

NES304

Quote from: pedro on August 30, 2012, 02:16:20 PM
Nice looking engine NES, should have a bit more grunt than the grey ;)
          Pedro
True, and another set of complications and more costs..



FCRB26

I still have the grey motor if you have another hissy fit and change your mind (again)  ;D

NES304

Quote from: fchoon on August 30, 2012, 04:12:43 PM
I still have the grey motor if you have another hissy fit and change your mind (again)  ;D
ouch



NES304

Quote from: fchoon on August 29, 2012, 01:37:25 PM
Probablly wanna pull air con and alternator off before you try to hard
Oh so you mean like this then?


Using EFILIVE to hook up to the car computer. It shows all faults etc and live RPM, speed too. I'll use this to remove the airbag warning amongst other things.

It's a shitty old laptop that I can leave permanently in the car if needed.



FCRB26

ight have to cut a hole in the bonnet.
Might look a bit silly a pc catcher hanging out the bonnet. ;D

Mc Bean



Boo Hoo Boo Hoo, that is my misses crying when she seen what you did to her be lovered car Mark.
Andy