News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Front Guard Alignment

Started by FCV08, May 09, 2012, 10:05:10 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

FCV08

May 09, 2012, 10:05:10 PM
Looking for some photos on how the front guards line up.

I am finding it difficult to get the upper rear to line up with the cowl panel.

Thanks

Craig D

EffCee

#1
June 01, 2012, 08:15:39 PM
Hi Craig,

there was some photos on the forum some time back in relation to the rear of the front gaurds. The problem (from memory) is that the original door rubbers had a tag that came out of the rubber and went underneath the bolts. If you don't have any insertion rubber or similar under your bolt hole points then it will be difficult to get it all to line up properly.

Keith
Canberra, ACT

F4+ ;)

jack_fc

#2
June 01, 2012, 08:54:05 PM

When I was a young lout, 'insertion rubber' had a completely different meaning...

Now that I'm an old lout, I know that Keith is right  :)
"when I was a young lout, it was all about sex, drugs, rock'n'roll, beer and hot Holdens. Now I'm an old lout, but I've still got the old Holdens and beer..."
Print
Go Up Pages1
User actions