News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Extractors

Started by NES304, April 08, 2012, 01:12:26 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

NES304

April 08, 2012, 01:12:26 PM
So I have a VT ecotec motor..... Found a cheap set of VR V6 extractors which I am told will hug the engine more.
Q1 will they fit?
Q2 are they such that I won't need to modify them (much) at all to slip down between engine and the bay?
Cheers


FC427

#1
April 08, 2012, 08:40:13 PM
 I tried this a while back and found from memory the passenger side is close but still need some modifying the driver side was no good ..think the Pat Gardner ones were only $300 and they fitted up neat ;D ;D if it had been on one of my cars I would have played with them  but as it was on another persons car it was cheaper for them to buy new than for me to play with second hand extractors .....FC427......
As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride

NES304

#2
April 08, 2012, 09:15:44 PM
That'd be awesome if he answered his phone or had a website that worked


FCV08

#3
April 10, 2012, 11:20:10 AM
Keep trying with Pat as I managed to get them between 10.00am and midday.

I understand they are upgrading the website.

Is it woth trying their email address?

Regards

Craig D

NES304

#4
April 10, 2012, 04:03:27 PM
Tried the email too. Found an engineer in TAREE that will help with the approval process!


FCV08

#5
April 10, 2012, 04:04:21 PM
No worries good to see other options are available.

Cheers

Craig D
Print
Go Up Pages1
User actions