News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

gearbox crossmember mount

Started by FC 304 wannabe, November 15, 2011, 08:29:27 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

FC 304 wannabe

November 15, 2011, 08:29:27 PM
Hi guys, got my 304 v8 into my fc today !!
Now I have to fabricate a gearbox mount...
Any suggestions, the box is a t700 .
I've heard a 3 degree angle on the tailshaft is needed....

FCV08

#1
November 15, 2011, 11:24:24 PM

FC 304 wannabe

I have manufactured my own but have also modified under the floor to fit the mount.

My thread is Here we go again !!! on about page 3 of the Under Construction topic. (struggling to put the link in)

May help you. I am sure there are many suggestions that will come your way.

Good Luck

Craig D
Print
Go Up Pages1
User actions