Winscreen wiper assembly

[FCV08]

Can anyone let me know where I can get the windscreen washer tube to fit to my wiper mounts?

I have the jets just need these tubes.

Thanks

Craig D

[FE 4 ME]

Hi Craig,
  A quick and easy way to sort this problem out is to use clear fish tank air hose. It works perfect as i just checked and it's a snug, tight fit ( you just have to be careful as there's 2 type of sizes used...just take your wiper washer with you i guess ). It's cheap as chips and you can get it at variety stores, Pet Stores, BigW, Kmart or sneak some off your mates fish tank when he's not looking  ::)

but it will do the trick for you... im going to use it   ;)

hope it helps you out Craig


"Have A Great Holden ( FE ) Day !!!"  :):):)


FE 4 ME

[FCV08]

Thanks for the prompt response.

I am actualy after the brass or copper tube the fits into the housing.

Thanks

Craig D

[FE 4 ME]

ouch that would be a hard one to find.... maybe it might be best to source ones that have them or tap a small nipple into the housing and than connect the washer line to the nipple ????

it's just a thought... but it might just work...getting that tube on its own might be rare task


FE 4 ME

[Rusty EK]

Just have the same problem myself , was suggested to me to try a model shop for the tube .

Sent the wife off today to try it out , will let you know later how she went .

[57effie]

Try a place that specializes in water pumps, we have McCrackens in Qld. Plumbing supplies wholesalers should have it as well. The pressure switches use a small copper or plastic tube to operate the pressure switch, 3/16th or 1/4 inch. I bought a metre of copper a couple of months ago for $9. They'll have compression fittings to fit as well.

Mark

[Rusty EK]

Wife picked up the tube for me today , no problems , 1/8 copper ,same size  as original , $3 for a piece about 250mm long .

Go to the hobby shop  ;) best send wife or girlfriend though , dont think I would of got out of there for only $3 , too many toys in there  ;D

[FE 4 ME]

Sounds like the best way to go...but it if all else fails the link below will be sure to help you out


hope it helps ..if not at least it gives you more choice Craig


http://www.ebay.com.au/itm/FRONT-WINDSCREEN-WIPER-BEZEL-SUITS-FE-FC-HOLDEN-/170692102289?pt=AU_Car_Parts_Accessories&hash=item27be0ac891




"Have A Great Holden ( FE ) Day !!!" :):):)


FE 4 ME

[mcl1959]

I have quite a few of these here still attached to wiper bases - pm me if interested

Ken

[FCV08]

PM sent

Thanks Ken

Regards

Craig