News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

SBC rubber engine mount

Started by crowbar, June 28, 2011, 02:09:45 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

crowbar

June 28, 2011, 02:09:45 PM
I have a CRS modified front crossmember for small block Chev
Would anyone know what rubber engine mount is required for this conversion
It appears to have some sort of spacer bolted between the mounts welded onto the crossmember and then ( I presume) should bolt to the rubber engine mount attached to the engine

Cheers
Crowbar

FC427

#1
June 28, 2011, 02:46:31 PM
The CRS mounts should bolt up to the Chev rubber mounts ...HK HT HG used a steel adaptor  that fitted the chev engine mount and Holden front end .......FC427.....
As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride

crowbar

#2
June 28, 2011, 03:42:52 PM
Thanks FC427
You got me thinking so I rang CRS
Appears that the cross member I have is for SBC to HR which require the adaptor
I have ordered the proper weld on mounts to suit FE

Crowbar

FC427

#3
June 28, 2011, 04:43:01 PM
Did you order an outrigger as well  ??? ??? ???....FC427.....
As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride

crowbar

#4
June 28, 2011, 06:20:54 PM
Got that some time ago as I thought that was the only difference
Should have done a bit more homework

Cheers
Crowbar
Print
Go Up Pages1
User actions