News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

fe /fc gaurd

Started by GMHwagoon, April 17, 2011, 03:50:22 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

GMHwagoon

April 17, 2011, 03:50:22 PM

  can anyone tell me the basic difference between the fe and fc gaurd in reference to the front indicators.
  if l have fe what do l need to do to make them suitable for the fc indicators

           thanks greg

DN2168

#1
April 17, 2011, 04:41:45 PM
Hi Greg,

FC have 3 holes for mounting blinker assembly, where FE only have 2 mounting holes. Also the holes for the wiring are in different places on the guard. Best to look through some of the project threads & you will see what I mean.

Dean.

mcl1959

#2
April 17, 2011, 09:50:43 PM
The hole for the FC indicator globe holder is lower than the FE - it is almost right down on the join in the panel. Also FC guards had a slight dimple where the indicator mounts. If you use an FE guard you generally need some spacers at the bottom hole to line the indicator housing up with the grille.

Ken
Print
Go Up Pages1
User actions