guage lettering

[Utemad]

White decals in reverse to replace the original oil / gen / temp and fuel. Exact copy of the original text.
$10 a set including postage.
Send me a pm if your interested.
Regards Brent 0415 467 300

[FCV08]

Gday Brent

Can you do the lettering in a different order i.e. Wilsonia Guage OIL/GEN/AMP or as I am attempting for the LHS setup, ENG/BRAKE/H'BR.
I am replacing the fuel guage with the three idiot lights (normally RHS) to match in to my V8 conversion.
My fuel guage is an aftermarket one to suit a VN Commodore sender unit.

Are you able to post a photo of your work?

Thanks
Craig D

[Utemad]

Hi Craig,
I can do them in a different order if you wish, also different colours. Heres a photo of my dash with new decals

[Utemad]

and of the other side

[FCV08]

Brent

May seem a dumb question but are these on the inside of the glass?

Thanks

[Utemad]

Yep, the hard part is getting them straight! ;)

[TTV6FC]

Not really even that hard if you mark them out on the front of the glass before you clean what's left of the old letters off the inside.Use a Stanley knife and a pair of tweezers to transfer them.Best not done after 10 or more beers though... :P



Cheers,Jamie.

[FCV08]

Brett

Just wondering if you can still make up the lettering?

I need the OIL/TEMP/GEN for the WIlsonia Guage and ENG/BRA/HBR for the other side.

Please PM me with the price.

Thanks

Craig D

[FCV08]

Brent

Are you still doing the guage lettering>
Cheers

Craig D

[Stash]

Craig
I would pm him.
From all accounts he does check site often an a pm will at least notify him.

Cheers

John

[FCV08]

Thanks John

Sent a text and got all organised.

Cheers

Craig D

[black57]

Hi guys,

I'm doing mine at the moment, but I have about 10 sets of gauges and a couple of wilsonias too, and no 2 have the letters in the EXACT same place or the EXACT same size. Even looking through this thread there are differences, E&F sizes etc. 2 of mine don't even have the word fuel on them.
Does anyone have info on the EXACT size and position?

Pinky.

[Utemad]

Hey Pinky,
  I took the measurements from my original guages in my 80,000 mile ute. These were an exact match in every way. I guess there were a number of different templates used in the production line, if you prefer a different version to those in the photos above I can make you a custom set.
Regards Brent

[Stash]

Utemad.

The ones u sent me had slightly different spacings to the original. So I split the transfer.
Must have had different templates in the day..

[black57]

Thanks Brent,

But I'm making mine own. Just needed to know if there was an exact position recorder by GM somewhere.

Pinky.

[FireKraka]

Hey Brent do you still have any of the lettering available

Regards
Neil

[pbh0069]

Hi Brent,
would like to get a set as well if you have any
cheers Phil. ;D