News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Chrome bumper bar bolts

Started by brett_f, March 29, 2011, 07:47:39 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

brett_f

March 29, 2011, 07:47:39 PM
G'Day Guys
Looking for a new set of chrome bumper bar bolts. 6 in total. Rares have none and the ones on ebay are incorrect. If anyone knows where i can buy the set or have some they are not using please let me know.
Regards Brett

Glenn 'Stinky' Stankevicius

#1
March 29, 2011, 08:37:28 PM
The ones on my FE were from a fastener shop, full stainless steel. I took in my old ones and they matched them perfectly, all I had to do was file off the lettering and polish them up, just like bought ones ;)



FC427

#2
March 29, 2011, 08:54:11 PM
The Bumper Bar  bolt kit are on ebay .....FC427.....
As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride

FE 4 ME

#3
March 29, 2011, 09:29:01 PM
Stinky,
    can you tell me the size and length of the rear side bolts so i can go down to my local and see if they have them in stainless ...sounds like a great idea

FE 4 ME
$$$ Parts Catalogue 1948-1969 for sale ONLY $15 $$ all Money goes to the FE/FC Club QLD PM Me to get this great Catalogue

Glenn 'Stinky' Stankevicius

#4
March 29, 2011, 09:32:55 PM
Quote from: FE 4 ME on March 29, 2011, 09:29:01 PM
Stinky,
    can you tell me the size and length of the rear side bolts so i can go down to my local and see if they have them in stainless ...sounds like a great idea

FE 4 ME

No idea sorry, took my old ones in and they matched them, I binned them after that.

FE 4 ME

#5
March 29, 2011, 09:36:15 PM
ive got some here ( maybe 1 laying around..not sure about a pair ), but they look too short..were your rear side ones approx 1 1/2 long if you can roughly recall ??
this looks around that length



cheers Stinky

FE 4 ME

$$$ Parts Catalogue 1948-1969 for sale ONLY $15 $$ all Money goes to the FE/FC Club QLD PM Me to get this great Catalogue

brett_f

#6
March 29, 2011, 10:22:16 PM
Thanks for the replies but i want the chrome ones. The sizes are 2x 5/16x2",  2x 5/16x 1 1/2' and 2x 7/16x 1"

Regards Brett

JB

#7
March 29, 2011, 10:39:12 PM
Phone +64 223509263

zulu

#8
March 29, 2011, 10:49:28 PM


Brett says the epay ones are no good.

If you still have, or can get the originals they will polish up as they are a stailnless steel shell over a steel bolt, at least thats what I did with some of mine.

Stinky seems to have the best answer, try a bolt & fastner shop for stainless steel & have them polished

brett_f

#9
March 30, 2011, 08:26:30 AM
JB
They are the ones i have seen. If you look at the pic they are all the same length and size. No good for the FC.
Zulu,
i do have the originals but the chrome is down and i dont want to put them on new bars. Might have to get them rechromed if nothing comes up.
Thanks for all replies so far.
Brett
Print
Go Up Pages1
User actions