HR front end in a FC

[Muz]

If i put a complete HR front end and strreing arms in my FC ,will my grey motor fit in without modifing the sump? Can any one help .Cheers

[FC427]

It will fit but you still need to change out rigger and the steering arms will just hit the sump on full lock that's my experience with it .....FC427....

[Muz]

Out rigger has been changed, Is there any thing that can be done so the steering dosnt hit ,Grinding or re fadracting. Cheers

[FCRB26]

somethings wrong steering should not hit .
are you using HR daglink or FC
check your front engine mount is not persished.
Are you running original box or something else.

[mcl1959]

FC draglinks will just hit, HR draglinks wont hit

Ken

[ratbox]

but doesn't the HR draglink sit further back ?  i've found with red motors on full lock the draglink hits the sump but changed back to EK and problem solved, my motors aren't to far forward as i set them back as far as i possably can missing firewall seem by millemeters

may be a different case with a grey motor

[Muz]

I am using a HR crossmember,and steering arms including the draglink. Will the grey motor sump be alright or does it hit ?  Cheers Muz

[FCRB26]

Using a grey motor and HR draglink clears everything .... ;)

[colt]

Same as what fchoon said. HR draglink with grey motor is all clear.