News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

drag ways

Started by ashfe, November 02, 2010, 05:52:38 PM

Previous topic - Next topic

ashfe

i have  2 pairs of dragways  2 13x8's and 14x8's 13 have good tyres 14 tyres are shot not sure how much there worth will put pics up soon located ballarat vic

ashfe


13 inch tyres are road hugger 205 60 13 with about 60-70% tread

FC_NUT

Hi, what is the condition is the chrome on the rims, and will you sell the 13inch pair only?

Regards Daimien
Daimien,   

Carrum Victoria

newman

If Daimien is interested in the 13's I am keen on the 14's depending on condition of rims, are the rims straight without any gutter rash on the outer rims and could you take the old tyres off for transport? I'll send you an email address so you can send some close up pics of both of the 14's.

Mick 8)

ashfe

the crome has some surface rust around edges there is no gutter rash on any of the rims 1 13 inch rim has very small dent about 10mm long by 5 mm if that will separate pairs taking offers as long as there realistic

newman

Check your emails please, you sent me pics of a steering wheel mate.

Mick 8)

ashfe

wheels still available

weddo

The early 13 and 14 inch dragways had separable hoops and centres. New hoops are still available from ROH, the original hoop suppliers. The later dragways had a steel insert cast into the centres that was welded to the hoops. 13 x 7 is about the maximum you can run on a lowered FC front and rear without  modifications, or a different of set hoops, which will allow offset adjustment

regards


Weddo