Blue 202 with A/C

[colt]

Has anyone got a Blue 202 with the original A/C bracket? Is the A/C compressor bracket part of the alternator bracket? Or are they on different sides of the engine?

Colin.

[Damo58]

From memory i think it is part of the alternator bracket  ???

                                   Cheers Damo58

[FC427]

 Compressor originally mounted of the head on the drivers side on blue & black 3.3 some of the starfire 4 in the Toyota  had a mount for it on the other side also some of the after market air kits reused the standard alt mount just moved to the A/C mount is this what you mean Colin ......FC427......

[colt]

This is what I am getting at: the standard Holden alternator brackets break (I mean the top one), they also break the mounting bolt at the water pump. I have been told the blue motor alternator/Ac bracket uses two bolts at the motor rather than one, therefore spreading the load, also not relying on one bolt.

I am after an alternator bracket that uses two bolts onto the motor. If there is a Holden one readily available I would use it, before I modify mine.

I already have two standard alternator brackets welded together at the top, I am trying to strengthen where it bolts to the motor.

Colin.

[colt]

In the thread "Engine and Gearbox Choice" there is a pic of OL GIRL 58's engine bay. The top alt. bracket is clear. Did they make a top alternator bracket which also would have been the bottom bracket for the A/C comp. If so, which engine should I be looking for.

Colin.

[FC427]

Blue Black engines have an extra mounting point cast on to the block about level with the water pump  but it is not used for adjusting the alternator ... Colin Can't you just make a mount that picks up the 3/8" bolt on the thermostat  housing and supports the original mount on the water pump so to take the load of the 5/16" water pump bolt or go up to a grade 8 bolt ??? ....FC427.....

[colt]

Mark, that's what I'll be doing.

Colin.