News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Seat Belts Again

Started by KFH, July 18, 2010, 06:25:22 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

KFH

July 18, 2010, 06:25:22 PM
I am considering putting recoil belts in the front of the car.  I am thinking of cutting an opening on the inside of the bottom of the B pillar and mounting the bottom plate there and also feeding a plate up to the top section.  This will let me get away with one opening.  What I wish to know is it possible to get a 3" x 2" x 3mm plate with a 7/16" nut welded on the back of it threaded past the metal work that supports the rear door hold open spring.  Has anybody done this?

Keith
I was born with nothing and still have most of it left
Print
Go Up Pages1
User actions