News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

2 door wagon

Started by stevenp, June 20, 2010, 07:12:58 PM

Previous topic - Next topic

stevenp

Hi im a member of the fbek forum,  myself and a mate have just picked up a 2 door fc wagon with windows all around, can anyone tell us a bit about these wagons. thanks steve

FCRB26

Panel van with windows all around im guessing.

Any pics

FC427

As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride

stevenp

Quote from: fchoon on June 20, 2010, 07:36:18 PM
Panel van with windows all around im guessing.

Any pics
havent taken any pics yet will try and get some this week

stevenp

Quote from: FC427 on June 20, 2010, 07:41:22 PM
A Vanette
whats the difference between a vanette and a panel van

zulu

It's basically a panel van that has had windows cut into the sides, This was done by various companies, in NSW Canopy Industries, in Victoria it was Baileys Motor Body Builders.

As well as side glass it was also possible to add rear seats & even a rear side door, for less dosh than buying a wagon

A lot of vans have had the glass treatment, so much so that I think they would out number original all metal side vans, some have removed the glass & reinstalled the metal sides.

   

zulu

Mc Bean has sent a pic of a  8) 2 door wagon with a folding Canopie Industries rear seat, note the round bar or pipe supports between the windows



Tell us more Andy, is it an FE or FC

Brad

Is the fold back and up seat as per the above pic  rare or are they fairly common with this type of modification ? My van has one but I have never seen any like it before. The van has two doors  and full windows . Wagon windows at the back and "Denning" sliding windows between the B and C pillars where the rear doors would be on a wagon . I think it was a windowless van from the factory but I'm not sure.
  Brad.
Id rather have a full bottle in front of me than a full frontal labotomy

Mc Bean

Hi All

It is an FC van, which I am lovenly rebuilding with the help of you guys for a good friend of mine.

Andy
Andy

mcl1959

Most vans left the factory with rear glass in the tailgate (option 333) on the ID plate, They all had no windows in the sides.
GMH dealerships had close ties with body builders in the 50's and they would arrange for your new van to have windows fitted to suit your needs on purchase.
So even though the van had no windows when built, it would have side glass fitted to your order when you picked it up.
The rear seat fitment is quite rare.

Ken