News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Painting

Started by jasonr70002, April 12, 2010, 01:57:44 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

jasonr70002

April 12, 2010, 01:57:44 PM
Hey guys just wondering if in regards to bare metal do I need to coat the steel in etch primer or is red oxide ok. The reason I ask is that I already have red oxide but I will just get etch if that is what is needed to recieve the best finish. And also the FE was originally done in oxide which is also another eason for asking and the finish paint will be 2 pack.

Cheers Jason
Golden Holdens FE-FC

FC427

#1
April 12, 2010, 04:28:24 PM
 Jason I would use  Wash primer it is a two pack  etch .....FC427.....
As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride

Glenn 'Stinky' Stankevicius

#2
April 12, 2010, 05:28:05 PM
Is that something you can use at home or do you respirators and a booth?
Print
Go Up Pages1
User actions