News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

FC Van project start

Started by GMVAN, April 05, 2010, 10:35:22 AM

Previous topic - Next topic

GMVAN

Hi all I bought a FC van four years ago and I have just started to build it up, once I work out how to put photo's on I will do a story on it. If anyone can help with putting photo's on would be very helpful Thanx, steve
:(If at first you don't suceed give up & have a beer;)

Old_Mt_Isa_Boy

http://fefcholden.org.au/forum/index.php/topic,5613.0.html

I found this page very useful. It is essentially about getting an address between "[ img ]URL[ /img ]" The URL is the web address of the location of the image [img]. I also joined Photobucket before I started and have all of my images on that web bases photo storage in my own album.

Regards Wayne

GMVAN

Thanks wayne got all photo's in bucket now just got to work out how to add to my post
:(If at first you don't suceed give up & have a beer;)

GMVAN

][/url][/img]
This is the van when I got it 4 years ago.
:(If at first you don't suceed give up & have a beer;)

Old_Mt_Isa_Boy

Success at last well done Steve. Looks like a great find. Hope it goes well.

Regards

Wayne

GMVAN

Hi got 1 photo up went had smoke now having trouble again not real easyIMG]http://i872.photobucket.com]IMG]http://i872.photobucket.com[/url][/img] Sorry no commentry had enough trouble just getting photo's up but as you will see we moved house & got smaller shed but is big enough,lost 2 months moving so not much been done to car yet. Will try & work out how to do 2 things at once and will get more photo's with commentary up, better with tools than computer
:(If at first you don't suceed give up & have a beer;)

customFC

Hey Steve
Looks like you have a nice solid van.
By the pics, progress does not look too bad.
Keep at it and keep the pics coming.
Regards
Alex

TTV6FC

Nice work Steve.I sometimes wish I had started my thread when I got to the stage you're at....Keep up the good work and the pics.Cheers,Jamie.
Run your fingers over my Holden and I'll run my Holden over your fingers!!!!

pedro

G'day Steve, welcome to the forum, nice van you don't see too many of them that straight and rust free nowadays.
           Pedro
I love animals - they taste great

F4+

Grimbo

Progress always progress whether a little or a lot. Looks like she is coming along nicely. Got to love a van. :)
Don't judge a man until you've walked a mile in his double pluggers.

GM

Hi Steve, what plans do tou have? Colour........ drivetrain.......etc.........?
Upon the hill there stood a cow.
It must have moved, It's not there now.

GM

Sorry do you have. (Should use spell check)
Upon the hill there stood a cow.
It must have moved, It's not there now.

GMVAN

Hi all the colour is factory light blue,once I found out the right colour from dulux & ppg. The van will look original from the outside but the running gear will be black fuel injected VK motor with 5 speed which I have sitting in shed,but making it so I can easily convert it back to original running gear which I also have in shed. The next pictures hopefully will have commentary with them so I can show better shots.
:(If at first you don't suceed give up & have a beer;)

GMVAN

Just a bit of catch up here found some more photo's of ongoing work[/img]
:(If at first you don't suceed give up & have a beer;)

GMVAN

 Still can't work out how to do 2 things at once(Leave photo and talkies) but think Ive got it nutted out now. Any way these photo's are of the subframe That I found from early repairs that were done by previous owner to ongoing repairs to the end result of a rust free subframe.
:(If at first you don't suceed give up & have a beer;)

Old_Mt_Isa_Boy

Looking good Steve. When you get your first photo between the "[ img ]URL[ /img ]" simply hit the enter key and you will be on the next line. You can then type some info and hit enter again and then place your next photo between the [img]url thingie.

Regards


Wayne

GMVAN

#16
Thanks to Graham (spanner c) in Queensland I got this panel made to fit between the lower tailgate & the spare wheel door.

:(If at first you don't suceed give up & have a beer;)

GMVAN

#17
Welded it on the other day Fun !!!!
:(If at first you don't suceed give up & have a beer;)

GMVAN

#18
Finally got it done now to tackle tailgates.
:(If at first you don't suceed give up & have a beer;)

GMVAN

#19

Stripped old tailgates lucky no rust at all.


also got to paint the dash.


Photo does not show the shine very well.
:(If at first you don't suceed give up & have a beer;)