News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Heater Switch

Started by mike, February 03, 2003, 05:32:29 AM

Previous topic - Next topic

mike

Hi I am in the process of setting up my smiths heater (2 door type) into my FE and was wondering what switch is meant to be used and where does it mount and does anyone have a spare one for sale.

thanks mike.

coolaride

hey there

there was a preslite variable speed switch available
which mounted on the right hand side of the dash face.
this switch is very hard to come by.( it took me a while to find mine .)

also a nasco switch which is black and its just a pull
type . readily available at swap meets .

i`ll see if i can find one for you.

hope this helps.

cheers

coolaride.

coolaride

hi again

i meant to mention that i have a nos pleslite switch knob which is for sale , you can mount it in the same position and put a different switch behind it .
it should look ok too.

cheers

mike

Thanks Coolaride if I can get a switch i will probably grab the new knob, also can anyone put on a picture of the types of switches so I know what to look for, knowing me I have probably walked past them a dozen times and not realised.

thanks mike.

coolaride

hi

DOH!

i forgot about the switch in my own car .
theres now i picture of it in the parts for sale section.

cheers.