News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

RUST CONVERTER

Started by graham_fuller, January 20, 2010, 01:49:22 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

graham_fuller

January 20, 2010, 01:49:22 PM
What is the best product to use for surface rust converter?
Cheers,
Graham

Ken's 57

#1
January 20, 2010, 10:30:47 PM
Graham - I found Metal-Ready worked really well.

http://www.por15.com.au/

Cheers......Ken

graham_fuller

#2
January 21, 2010, 07:07:06 AM
Thanks Ken,
Do I need to use etch primer afterwards. These are external body panels.
Cheers and thanks,
Graham

FC427

#3
January 21, 2010, 08:45:44 AM
Dexodine as [per instructions]  with a nylon scourer and then etch ......FC427......
As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride

graham_fuller

#4
January 21, 2010, 01:34:44 PM
Thanks Mark,
Does Deoxodine remove the surface rust?
Cheers,
Graham

FC427

#5
January 21, 2010, 06:19:22 PM
Sure does if you can't get Dexodine  most Metal Conditioners from the spray paint supply shops will work there are many different brands .......FC427.....
As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride

Ken's 57

#6
January 22, 2010, 08:50:51 AM
Graham - I'm pretty sure it etches the metal making it ready for painting. It's also non-caustic and water soluble which I prefer. They're usually happy to help over the phone if you need a bit of advice.

Tel: 9999 0122
Print
Go Up Pages1
User actions