Tail shaft yoke

[KFH]

I have been cleaning up the tail shaft and universals.  On the short section that couples the gear box to the front universal I notices a small grove where the rear seal runs.  Can you buy a sleeve that will go over the shaft?  There is a new seal in the output of the gear box but I feel a small amount of oil will leak out if I do not sleeve the shaft.

[mcl1959]

Yep  - a very thin stainless sleeve which is installed over the top of the original.

Ken

[FC427]

 A lot  bearing shops sell  Speedy Sleeve .......FC427......

[KFH]

Thanks Ken and Mark.  Looks like the same type as I used for the harmonic balancer.  Will pick ome up the mext time I am in town.

Keith