Fitting block hugging headers to SB Chev in FC

[Stubzy.69]

Has anyone fitted theese before? if so could you give me brand ect.

Cheers Stubzy.69

[ratbox]

pretty sure you can't use them on an FC

[tuffute]

You would be able to make your own extractors to hug the block as a small block Chev is narrower than the holden v8 engine,
of course what rack & front end you are using will determine how they need to be routed

[fcv85l]

you can fab your own set and notch the subframe,or cut holes

[FC427]

If you want to get a little more room to get the exhausts down the sides  get rid of the side engine mounts and make up a front plate to mount the engine, Your primary pipes will only be around 1 1/2" but that should be OK for around 350 HP ......FC427.......

[Ed]

fun and games!

[FC427]

These might go close or only need minimal modification you can just see the front plate  .....FC427....[/img][/img]